ตัวกรองผลการค้นหา
flywheel starter ring gear
แปลว่าแหวนเฟืองหมุนล้อช่วยแรง
flywheel alignment testing gauge
แปลว่าเครื่องตรวจสอบแนวตั้งของล้อช่วยแรง
flywheel to crankshaft bolt
แปลว่าสลักใส่ล้อช่วยแรงติดกับเพลาข้อเหวี่ยง
too much amniotic fluid in the pregnancy
แปลว่าแฝดน้ำ
Fluidization
แปลว่า(Environmental Engineering) The suspension of particles by sufficient upward velocity of the fluid. During fluidization the gravity force is overcome by a combination of buoyancy and fluid friction.
ACCUMULATOR
แปลว่า(english) A vessel, normally cylindrical, which is used to store fluid and gas for future release of the energy in the compressed fluid and gas. Normally contains a diaphragm or piston between the fluid (liquid) and gas chambers. Fluid is normally introduced at one end and the gas at the opposite end.
BETA RATIO (#)
แปลว่า(english) The amount, expressed as a ratio, of particles in a fluid stream upstream of a filter, after the fluid posses through a filter, divided by the amount of particles downstream, for a particular size particle.
Influent
แปลว่า(Environmental Engineering) The fluid entering a system, process, tank, etc. An effluent from one process can be an influent to another process. See effluent.
BURST PRESSURE
แปลว่า(english) The level of pressure at which a component, pipe, tube, hose or other fluid passage will burst during application of internal pressure. Normally 2.5 - 4.0 times working pressure.
BALL VALVE
แปลว่า(english) A valve that may be used to divert the flow of fluid in a passage. Most normally configured in a two-way pattern that is either open or closed.
Pressure:
แปลว่า(english) Pressure is a similar idea to stress, the force intensity at a point, except that pressure means something acting on the surface of an object rather than within the material of the object. When discussing the pressure within a fluid, the meaning is equivalent to stress.
Bent Axis Pumps
แปลว่า(english) In this pump, the pistons are at an angle to the drive shaft and Thrust Plate. The piston block shaft is connected to the drive shaft by a universal joint, not shown. The drive shaft, thrust plate, piston block shaft, and piston block all revolve. The connecting rods are attached to the thrust plate and revolve with it, unlike the swash plate pump where the piston rods slide past a stationary swash plate. The outlet ports are semi-circular holes in the Valve Plate, shown on the far right of the animation on edge and in a head-on view below, right. As the pump revolves, half the pistons suck in fluid as they pass over the intake port. The other pistons discharge their fluid through the outlet port. This pump should be compared to the radial piston pump, swash plate pump, and wobble pump.
