ผลการค้นหา

คำศัพท์/สำนวน บทความ  หาอะไรก็เจอ!
ค้นเจอ 135 รายการ

GQM (Goal, Question, Metric) paradigm

แปลว่า(Software Engineering) a technique for defining meaningful metrics for any part of the software process
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blanking

แปลว่า(english) An early step in preparing flat-rolled steel for use by an end user. A blank is a section of sheet that has the same outer dimensions as a specified part (such as a car door or hood) but that has not yet been stamped. Steel processors may offer blanking for their customers to reduce their labor and transportation costs; excess steel can be trimmed prior to shipment.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Back End

แปลว่า(english) 1) Usually refers to the entry end of process lines. 2) The outside lap 2) of the produced coil, or the inside lap of the consumed coil.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Blow Down

แปลว่า(english) Process that rids boiler feed water of solids and maintains the proper chemical balance of the feed water. Blow down can also be used to rid drum(s) of excess water.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Burn

แปลว่า(english) 1) Process of cutting metal by a stream of fuel and oxygen, 2) to permanently damage a metal or alloy by heating to cause either incipient melting or intergranular oxidation.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Refuse derived fuel (RDF)

แปลว่า(Environmental Engineering) A fuel derived from the combustible portion of municipal solid waste. The fuel is often processed into small briquettes, similar in size to charcoal.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

wet process

แปลว่าระบบเปียก (ในการทำเสาเข็มเจาะ)
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Bed-In

แปลว่า(english) Method whereby drag may be rammed in the pit or flask without necessity of rolling over. Process used in production of heavy castings.
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Basic Oxygen Furnace (BOF)

แปลว่า(english) "WHAT A pear-shaped furnace, lined with refractory bricks, that refines molten iron from the blast furnace and scrap into steel. Up to 30% of the charge into the BOF can be scrap, with hot metal accounting for the rest. WHY BOFs, which can refine a heat (batch) of steel in less than 45 minutes, replaced open-hearth furnaces in the 1950s; the latter required five to six hours to process the metal. The BOF's rapid operation, lower cost and ease of control give it a distinct advantage over previous methods. HOW Scrap is dumped into the furnace vessel, followed by the hot metal from the blast furnace. A lance is lowered from above, through which blows a high-pressure stream of oxygen to cause chemical reactions that separate impurities as fumes or slag. Once refined, the liquid steel and slag are poured into separate containers. "
 ศัพท์ช่างภาษาอังกฤษ – ไทย

open-hearht furnace

แปลว่าเตาหลอมเหล็กกล้า เป็นแบบเตาไฟสะท้อน ซึ่งมีกรรมวิธีทำเหล็กกล้าที่เรียกว่า open - hearh - process
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Paradigms

แปลว่า(Software Engineering) the process model
 ศัพท์ช่างภาษาอังกฤษ – ไทย

Box Annealing 2

แปลว่า(english) A process of annealing a ferrous alloy in a closed metal container, with or without packing materials, in order to minimize the effects of oxidation. The charge is normally heated slowly to a temperature below the transformation range, but occasionally above or within it, and then is slowly cooled.
 ศัพท์ช่างภาษาอังกฤษ – ไทย